Laboratory Systems
Laboratory Solutions
Innovating the future of
laboratory solutions
Fume Hoods
Drawer Hearth System - Order Code System and Technical Information
Fume Hood Body
Fume Hoods are made of galvanized sheet metal.
The completed cabinets undergo a phosphate washing process and are made suitable for painting.
The cabinets, painted with epoxy electrostatic powder coating, are baked at 200°C.
Bench Surface:
Industrial Ceramic Bench Surface 26/33 (Specifications mentioned above)
Glass System:
Made of 6mm tempered glass with up and down movement.
Placed into the glass channel with aluminum frames.
The glass channel is covered with pull plastic to facilitate glass movement.
Fan System:
Snail Type Exhaust Fan - (Motor size is determined after calculating the exhaust line)
It is a polypropylene centrifugal exhaust fan designed to discharge highly corrosive chemical vapors and gases.
Fan Control System:
Siemens Inverter
The inverter system is used to adjust the ventilation to the desired and safe value during laboratory testing.
If the value read on the VAV is low or high, the user adjusts the suction value with the inverter.
Air Flow VAV Control Monitor System:
Schneider-electric brand FM 500
Ensures the determination of air flow value in the fume hood exhaust discharge system.
If the suction value is above the specified value, it warns with a red light and sound.
If the suction value is below the specified value, it warns with a yellow light and sound.
If the suction value is within the specified values, it indicates with a green light that the values are appropriate.
Products comply with DIN 12924 and DIN EN 14175-2 standards.
Electrical Accessories:
- 2 pieces of 220A Gewiss Brand IP66 Single Socket
- 1 piece of 220A Gewiss Brand Lighting Button
- 1 lighting fixture
- Emergency start-stop button
- Fuse box
Water Line:
- 1 Cold Water faucet Far brand
- 1 Gas faucet Far brand
- 1 Industrial Ceramic Drip Cup
Fume Hood Base Cabinets:
Mobile type cabinets are used for fume hood base cabinets.
The cabinets are made of galvanized sheet metal.
The completed cabinets undergo a phosphate washing process and are made suitable for painting.
The cabinets, painted with epoxy electrostatic powder coating, are baked at 200°C.
Color= RAL 7047
Accessories Used:
Smart Slide Tandem Drawer Rail: Slow and silent closing - Easy installation feature
Stopper Cup Hinge: Slow and silent closing - Easy adjustability - 95°C opening